Typical sectional door

GATES

Sectional garage door designed for use in residential buildings or utility rooms.

The door skin is made of 40 mm thick panels filled with polyurethane foam. The door skin is made of 40 mm thick panels filled with polyurethane foam. The panel walls are made of hot-dip galvanised steel sheets, subsequently painted in two standard RAL colours, i.e. 7016 and 9016, and two woodgrain colours, i.e. golden oak and walnut.

The gate structure is made of galvanised steel elements. The whole door is protected by a system of permanent seals. The door is opened by means of an electric drive.

Features of a typical sectional door

brama-segmentowa
termika

Thermal insulation

Panels filled with polyurethane foam not only prevent heat loss from the garage, but also effectively suppress noise.

gwarancja

Safety

The gate is equipped with a safety device that prevents it from falling down automatically in case of spring breakage and the panels are constructed in a way that prevents crushing fingers.

Durability

The gate structure is made of hot-dip galvanised steel elements protecting the gate against corrosion.

Easy assembly

Quick assembly of the door is ensured by pre-assembled shaft withtorsion springsand easy-click console.

Colours, structures, applications, embossments

What we offer in standard?

Low front

uszczelka

Seal in lintel profile

brama-segmentowa-typowa

Rear beam

zoom_naped_272

CAME HOME HG 600 drive system with 2 remote controls

What else can we offer?

brama-segmentowa-alsecco-standard

Installation

Large selection of veneers, paints, any RAL colour

zoom_naped_1

BENINCA JM.3 drive system with 2 remote controls

zoom_naped_79

SOMFY DEXXO OPTIMO RTS drive system with 2 remote controls

Scroll to Top